Installation Of Electrical Wiring After Plastering

In this article, we will analyze the question of why we recommend installing cables and socket outlets after plastering. In our opinion, there is not a single plus in the installation of wiring to plaster. Unless the grooves need not be cut, this is only if the walls are very crooked, and the cable is guaranteed to hide behind the plaster so that there is still a centimeter above it.  If you’re uncertain, go with the best electricians when you’re making these kind of changes and you’re not sure how to do it.

The walls are even in new houses, and you will still have to gouge them, either before the plaster or after. But there is a huge minus – plastering with many socket boxes and protruding wires is much more difficult than just a flat wall. But in the installation of wiring after plastering – some pluses: 

  1. We already have the ideal geometry and final dimensions. You can determine the installation locations of the socket boxes as accurately as possible. This is especially true for old houses with curved walls; after plastering, the dimensions change greatly, and the socket boxes often have to be moved or pulled out, since they often turn out to be strongly recessed. 
  2. Flat, white walls much better guide customers. They already know better what they want and where to make sockets and switches. 
  3. Marking electrical wiring on plastered walls is several times easier than on a brick or block, where you will erase a dozen pencils while you draw everything. And all the same, it is badly visible, especially to customers. 
  4. It is much easier to drive the wall chaser on a flat wall than on a brick. Due to the tight fit of the protective casing, there is much less dust they want, and where to make sockets and switches. 
  5. Marking electrical wiring on plastered walls is several times easier than on a brick or block, where you will erase a dozen pencils while you draw everything. And all the same, it is badly visible, especially to customers. 
  6. It is much easier to drive the wall chaser on a flat wall than on a brick. Besides, due to the tight fit of the protective casing, there is much less dust. They want to make sockets and switches. 
  7. Marking electrical wiring on plastered walls is several times easier than on a brick or block, where you will erase a dozen pencils while you draw everything. And all the same, it is badly visible, especially to customers. 
  8. It is much easier to drive the wall chaser on a flat wall than on a brick. Also, due to the tight fit of the protective casing, there is much less dust.

Choosing a light bulb! Electrician tips

From the school physics course, it is known: the intensity of light is measured in lumens. The problem, however, is that the lamp packaging usually only lists the wattage in watts.

This is interesting: weak light can cause mental disorders, building codes state: the average illumination of an apartment should not be lower than 150 lumens per square meter.

Choose LED bulbs

LED bulbs are the most expensive but last the longest.

The second problem is which lamp to choose. Indeed, in every store, there are a great many of them.

Today there are three main types of lamps:

  • Incandescent lamps
  • Luminescent or halogen – they are also called energy-saving
  • LED

Incandescent lamps

Pros: they cost no more than 20-30 rubles. 

Cons: rarely work for more than one year. Moreover, these devices get very hot and can suddenly burst.

Halogen lamps

They cost more; the price can go up to one hundred rubles. 

Pros: they serve three or even six times longer than usual. 

Cons: an inert gas is pumped into the bulb of this lamp, which may contain mercury vapor. This means that the used lamp cannot be thrown into a regular waste container; such devices are collected in special containers.

LED lamp

Pros: the period of their work can exceed ten years. They do not heat up, and it is not scary to dispose of them in a container with solid waste. 

Cons: the most expensive, from a hundred rubles and more.

Match the light for each room

It is better to choose warm light for the bedroom.

When choosing a light bulb, you should pay attention not only to its type and cost but also to such an indicator as to the “temperature of light.”

– You have probably noticed that some lamps emit colder, white light or warmer, yellow light. On the packaging of modern lamps, you can find the inscriptions: warm, neutral, or cold. This is how manufacturers show us what shade the device will shine with.

Please note: for the bedroom and nursery, he recommends choosing lamps with the inscription “warm.” This creates a cozy atmosphere, and the details of the interior acquire a soothing “blurred” contours. But in the living room, hallway and bathroom, you can use a harder “cold” light. Small objects are clearly visible in their bright colors; it is convenient to read, shave, and do needlework.

Useful Tips When Installing An Electric Wiring In An Apartment

To correctly organize the electrical wiring in an apartment, it is not enough to draw up a diagram and make a detailed plan. You need to know a few rules and useful tricks to help carry out repair work more efficiently and efficiently.

1. Don’t save

Electrical wiring is one of the most important elements of the renovation; its quality determines the level of comfort of residents, the normal operation of electrical appliances, and the personal safety of each family member. Therefore, you should not skimp on materials; buy as high-quality items as possible. If you want to reduce the project’s cost a little, choose sockets and switches with the simplest, laconic design, as a rule, they are a little cheaper.

2. Don’t waste time

All electrical installation work in the apartment should be carried out in one day. You shouldn’t waste time and stretch the task over long weeks. In this case, the electrical cable will have too many connections, and the likelihood of malfunctions will increase several times.

3. Don’t overestimate your strength

Often, home craftsmen try to carry out as many repairs as possible with their own hands. However, without special education, devices, experience, and skills, this is not worth doing, especially when it comes to the electrician since this is a matter of aesthetics and the safety of the whole family, including children.

4. Sequence of work

Electric cables are laid before finishing work begins. Cables to outlets can be run directly across the floor and then filled with self-leveling compounds. In this case, you can avoid unnecessary wall chasing and save several meters of cable. You can find the so-called “invisible” junction boxes in specialized building supermarkets: they can be hidden in the wall and completely covered with plaster.

5. Careful planning

To not find yourself in a situation where there are not enough outlets in the house, or they are inconveniently located so that you have to entangle the rooms with additional surge protectors, you must carefully plan the location of interior items and electrical household appliances. Be sure to make special sockets for the TV, refrigerator, washing machine and place them exactly behind the device so that the wires do not lie under your feet. Be sure to calculate the power consumption so as not to power the refrigerator, electric stove, and washing machine from the same outlet at the same time.